Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 1120 / 2536

SET-STATE-VT1 3 of 1 Page SET-STATE-VT1
NAME
Channels VT1.5 of State Set set-state-vt1:
FORMAT INPUT
set-state-vt1: Address:ps=PrimaryState
;
DESCRIPTION
within: channels VT1.5 of states the sets command This
packs) circuit OLIU 29G-U or 24G-U using (when interfaces OC-12
interfaces OC-3
interfaces OC-1
interfaces. EC-1
and failures signal of monitoring the off and on turn to used is command This
channels. specified for signals maintenance
and OC-1, OC-3, OC-12, within channels VT1.5 for set be can states Channel
VT1.5 for and interfaces DS1 to cross-connected are that interfaces EC-1
or OC-3 an to ring OC-1 or OC-12, OC-3, an from dropped are that channels
interface. EC-1
are: parameters input The
Address
both for addresses Valid channel(s). VT1.5 the identifies Address
are: ring and linear
{m,a,b,c}-all
,
{m,c}-{1-3}-all
,
{a,b}-{1-2,all}-{1-7,all}-{1-4,all}
,
{m,c}-{1-3,all}-{1-7,all}-{1-4,all}
are: EC-1 within addresses Valid
{a,b,c}-{1-7,all}-{1-4,all}
are: OLIU) (27-type OC-1 within addresses Valid
m-{1,2}-{1-7,all}-{1-4,all} m-{1,2}-all, m-all,
,
{a,b,c}-{1,2}-all {a,b,c}-all,
,
{a,b,c}-{1,2}-{1-7}-{1-4,all}
later) and 11.0 Release OLIUs, 27G2-U (Requires
are: OLIU) (26G2-U OC-1 within addresses Valid
{a,b,c}-1-all {a,b,c}-all,
,
{a,b,c}-1-{1-7}-{1-4,all}
later) and 13.0 (Release
packs circuit OLIU 29-type or 24-type with equipped is shelf the If
are: addresses unit Main valid the slots, unit Main its in
m-{1-12,all}-{1-7,all}-{1-4,all}
11-450
2000 February 2 Issue
OC-3 DDM-2000