Switch
Position
Join
Basic
Automatic
Compatible
MERLIN systems
All models
All models
Model 1030 and 3070
MERLIN Plus
MERLIN II
Model 1030 and 3070
With Feature Module 4 or
With Feature Module 5
MERLIN II
Use this switch position to:
Join a call already in progress on
your voice terminal using a device
such as a telephone or recording
machine.
Originate calls with your telephone
or data device. You may answer
incoming calls using your telephone
or data device. However, alerting
rings for incoming calls ring only at
your voice terminal, not the tele-
phone or data device.
Activate automatic answering dev-
ices and industry standard, line-
powered alerts. Before operating
these devices, program an Auto
Answer-All feature button. This will
allow you to set the devices to go on
automatically when you receive ring-
ing calls. Use the following pro-
g r a m m i n g i n s t r u c t i o n s t i t l e d
“Automatic Answering Equipment.”
Provide simultaneous voice and
data service. Before operating the
connected device, program your
voice terminal by using the following
programming instructions titled
“Simultaneous Voice and Data Ser-
vice.”
Provide simultaneous voice and
data service. This feature requires
special wiring and system adminis-
tration. Refer to your MERLIN II
System Manual, Section 6, “Simul-
taneous Voice and Data Calls.”
2
Slide the three-position option switch to the selected mode of opera-
tion (Figure 1).
iss 2, cib3063-7