Lucent Technologies CentreVu User Manual Download

Page: 45 / 198

Using Screen Painter Editing Tools

CentreVu CMS Custom Reports

Accessing the Screen Painter

3-1

Using Screen Painter Editing Tools

Accessing the Screen Painter

To design your

CentreVu



Call Management System (

CentreVu CMS)

custom report, use the Screen Painter (

Figure 3-1

). On the Screen Painter,

you can enter report text, data fields, and data bars in a layout that closely
resembles the layout of the actual report.

You must define the report name and its select characteristics in the Edit
Report: Report Select window before you can access the Screen Painter for
that report.

Access the Screen Painter using the following steps.

Figure 3-1: The Screen Painter

Note

You can access the Screen Painter for a report that someone else
designed only if you are a

CentreVu CMS administrator. However, if

another user’s report has global access, you can add your own report
name and then copy that user’s report design on the Screen Painter
(see the “

Copying an Existing Report Design

” section in this chapter).

1. On the Report Select window,

enter the name of the report in
the

Report name

field, and

select

Find one

→

The select characteristics of
the report appear.

2. Select the

Screen painter

action list option.

→

The Screen Painter appears.

Summary of Contents for CentreVu







































































































































































































Search results

Summary of Contents for CentreVu

Reviews:

Related manuals for CentreVu

Brands by name

Popular brands

Lucent Technologies CentreVu, User Manual

Search results

Summary of Contents for CentreVu

Reviews:

Related manuals for CentreVu

Brands by name

Popular brands