Lucent Technologies CELLPIPE 20 series, User Manual

Page: 36 / 48

Configuring a 20 Series CellPipe
Configuring the quick command
4-10 CellPipe™ 20 Series User’s Guide
>>mode
Please select bridge or router:(b/r,r) <b|r>
Configuring the quick command
The
quick
command allows you to easily configure your LAN connections in either
the bridging or routing mode.
The quick command in bridging mode
The
quick
command in bridging mode allows you to easily configure eight PVCs.
For example:
>> quick
1 PVC existed, 7 PVCs available.
VPI(0-1023):8
VCI (0-65535):33
Packet Filter (Any/Ip/Pppoe): any
Add another PVC ? (y/n): n
Enable Spanning tree? (y/n) : y
The quick command in routing mode
The
quick
command in routing mode allows you to select the connection protocol
and set up the appropriate PVCs. For example:
>> quick
R1483(r)/ IPoA(i)/ PPPoA(p): r1483
0 PVC existed, 8 PVCs available.
Ethernet IP (149.198.65.46) :
Subnet mask (255.255.255.0) :
VPI(0-1023): 5
VCI(1-65535): 32
WAN IP : 149.198.6.46
Add another PVC ? (y/n): n