manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

Share
Download
Lucent Technologies CBX 3500 Configuration Manual Download Page 554

Beta Draft Confidential

14-6

1/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Configuring Fault-tolerant PVCs
Activating a Backup Binding Port

Activating a Backup Binding Port

If a primary port fails (or needs administrative maintenance), you reassign the Service 
Name of the primary port to a backup port. Since fault-tolerant PVCs use the Service 
Name as an endpoint, circuits configured for the primary port are rerouted to the 
backup port.

To activate a backup LPort for a service name:

1. Expand the instance node of the LPort where the service name binding is located. 

The Service Names class node appears under the LPort instance node.

2. Expand the class node for the Service Names. 

3. Right-click on the service name you want to activate and select Modify from the 

pop-up menu. The Modify Service Name dialog box appears (

Figure 14-2

).

Figure 14-2.

Modify Service Name Dialog Box

4. Clear the check box in the Enabled Primary Binding field.

5. Choose the Select Backup LPort button. The Select Backup LPort dialog box 

appears (

Figure 14-3

).

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands