Lucent Technologies CBX 3500, Configuration Manual

Page: 542 / 888

Beta Draft Confidential
13-4 1/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring Layer 2 VPNs
Configuring a Layer 2 VPN
Configuring a Layer 2 VPN
Use the following sequence to set up a Layer 2 VPN:
Creating a Layer 2 VPN
To create a Layer 2 VPN:
1. Expand the instance node for the network to which you want to add a VPN.
2. Right-click on the VPNs class node and select Add from the pop-up menu.
The Add VPN dialog box appears ( Figure 13-3 ).
Figure 13-3. Add VPN Dialog Box
3. Select the General tab and complete the fields, as described in Table 13-1 .
Step 1. Create the Layer 2 VPN (see page 13-4 ).
Step 2. Add customers to a specific Layer 2 VPN (see page 13-5 ).
Step 3. Dedicate a trunk to a specific Layer 2 VPN (see page 7-23 ).
Step 4. For SVC traffic, when you configure the UNI or NNI logical port, specify the
Network Overflow field (see
page 3-18 ). Then, dedicate this logical port to a
specific VPN and customer ( page 13-9 ).
Step 5. For PVC traffic, specify the Network Overflow field for the circuit
(
page 10-19 ). Then, dedicate the circuit to a specific VPN and customer
( page 13-9 ).