manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

Share
Download
Lucent Technologies CBX 3500 Configuration Manual Download Page 228

6-10

1/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Setting Logical Port FCP Attributes

Beta Draft Confidential

5.

Select the full path and file name for each of the rate profile tables listed on the 
Load Rate Profile Tables dialog box, using one of the following options:

•

Manually enter a new file name, including directory path information, choose 
Set, and go to 

Step 6

.

•

Choose Clear if you do not want to load a particular rate profile table, and go 
to 

Step 6

.

6.

Choose Load. The files are loaded into the Sybase database.

7.

Perform a PRAM Sync. See the 

Navis EMS-CBGX Getting Started Guide

 

for 

PRAM Sync instructions.

Setting Logical Port FCP Attributes

When you define logical ports on an FCP-enabled module, you must configure 
additional ATM FCP attributes for the logical port.

To set ATM FCP attributes for a logical port:

1. Access the Add/Modify Logical Port dialog box using the steps in 

“Adding an 

ATM Logical Port” on page 3-4

.

2. Choose the ATM FCP tab (

Figure 6-4

).

The ATM FCP attributes and default values differ depending on the IOM you are 
configuring. 

Figure 6-4

 shows an example of the ATM FCP attributes for the 

1-Port ATM OC12C STM-4 IOM.

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands