Lucent Technologies CAJUN M770, User Manual

Page: 89 / 266

Chapter 6 Managing Virtual Ports
Cajun M770 ATM Switch User’s Guide 71
Listing the VPI and VCI range information for all virtual ports
You can view the VPI and signalling VCI range information for all virtual ports that
exist or for a specific virtual port.
Any virtual port information that is marked with an asterisk (*) has been learned
by the M770 ATM Switch during the ILMI dialogue with the remote device.
Information that is not marked with an asterisk has either been configured by the
user or is the default setting for the virtual port.
To view VPI and signalling VCI range information about the virtual ports, enter the
vport show vpivciranges
command.
The
vport show vpivciranges
command displays the information described in
Table 6.3.
Command:
M15-155s8:/>vport show vpivciranges [<vport id>]
Parameter:
<vport
id>
The virtual port. This is displayed in the
format <slot>.<port>.<virtual port
number>.
If a <vport number> parameter is not
supplied then the VPI and signalling VCI
ranges are supplied for all virtual ports.
Example:
M15-155s8:/>vport show vpivciranges
Output:
Virtual Port VPI and VCI Ranges
Virtual VPI Sig Vpci Sig VCI Sig Vpci
Port Id Range Range Range Base
8.0.0 [0..0] [0..0] [32..1023] 0
8.1.0 [0..7] [0..7] [32..1023] 0
8.2.0 [0..0]* [0..0]* [32..1023]* 0
8.3.0 [0..7] [0..7] [32..1023] 0
8.4.0 [0..7] [0..7] [32..1023] 0
Table 6.3 Output from the vport show vpivciranges command
Field Description
Virtual Port Id The virtual port. This is displayed in the format
<slot>.<port>.<virtual port number>.
VPI Range The VPI range assigned to the virtual port.
Sig VPCI Range The signalling VPCI range assigned to the virtual port.
Sig VCI Range The signalling VCI range assigned to the virtual port.