Lucent Technologies CAJUN M770, User Manual

Page: 233 / 266

Cajun M770 ATM Switch User’s Guide 215
Appendix A
Default Settings on a New Cajun M770 ATM Switch
The factory-configured default settings for a Cajun M770 ATM Switch are shown in
Table 19.1.
Table 19.1 Default settings for a Cajun M770 ATM Switch
System default parameters
Community password PUBLIC
Serial/Telnet password No password
Date 01-JAN-1970
Time 00:00:00
IP address Will use BOOTP to obtain an IP address.
SNMP Secure mode Disabled
IP for the management LEC Enabled
LANE Services default parameters
LECS location Remote at WKA
Internal LES Enabled
Default Ethernet ELAN default
Default Unspecified ELAN default
The above ELAN is used when the name and
type of ELAN is not given.
Ethernet LES name default
Management LEC status Enabled
Management LEC ELAN Will join the ‘default’ ELAN.
Management LEC type Ethernet