C
A
Red key
B
FIGURE 8 Installing Toggle Bolts for Wall-Mounting the Voice Terminal
10
11
12
13
Insert the red key (provided in the hardware kit) into a toggle bolt,
and push with your fingertip (do not force or hammer the red key) to
pop open the toggle bolt (Figure 8C). Remove the red key and
repeat this procedure for the remaining three toggle bolts.
Line up the holes in the base with the toggle bolts in the wall.
Insert the top two screws into the base and partially thread the
screws into the toggle bolts.
Insert the two remaining screws into the lower mounting holes and
tighten all four screws (Figure 9).
iss 5, cib2853-8
