LuCell LU-3000, User Manual

Page: 10 / 20

10
│
LuCell (LU-3000)
1. Inserting batteries for alarm
2. Replace battery when:
3. Turning on alarm
1) Press red button to turn on.
- Green and red LED lights will turn on and then off.
2) Check if green LED turns on.
- If green LED flickers, adapter power is not
connected to safe. This will shorten alarm battery life.
We suggest to connect AC adapter.
3). Close door.
Alarm will work in 10 seconds.
Power
button
1
2
3
Alarm is located inside door.
1) Open door and lift alarm to remove.
- Be careful not to disconnect cable.
2) Remove battery cover on back of alarm.
3) Insert batteries according to +/-. Use 1.5V AA battery x 4.
4) Slide battery cover back and insert alarm.
- Lo-bAt appears on LCD with alarm icon and voice sounds “Replace the battery
in alarm.”
- red LED continues to stay lit or flickers on alarm.
7.
Using Alarm