LuCell LU-1000, User Manual

Page: 3 / 12

User Manual 3
Soft
Touch
02
1. Press the Start button at the center of touch panel in the upper part of the door
·The touch panel will be activated if you press the start button
·If you press the button twice in a row, the safe will change security mode
with the password cleared.
2. Enter the password
·The password is set to '1,2,3,4,5,6'when the safe is delivered.
·Press carefully so you do not hit an unintentionally button.
·If the password is continuously entered incorrectly five times, the alarm will
sound for three minutes. Do not remove the battery while the alarm sounds.
wait for three minutes and then use the safe after the alarm has stopped.
3. Check 'OPEN' on the ouch panel and listen to the sound.
4. Grasp the upper part of the door and open it.
·Do not use excessive force to open the door.
·Take care that your hand does not get jammed in the door when opening
the safe
How to open the safe
1. The door locks automatically when it is closed.
·Be careful that your hand does not get jammed in the door when closing the safe
·Close the safe completely after checking out to prevent something from getting
caught in the door.
·Keep small electronic devices, such as digital cameras, laptops, watches
(including mechanical models) stored away from the door to prevent damage
from exposure to electromagnetic fields.
How to lock the safe
Press START button Enter your password 'OPEN' display Open the safe