OPERATING INSTRUCTIONS
1. Connect the optical output to the plastic optical fiber.
2. Connect the power source: +12V DC is the red wire on the camera.
3. When the picture appears on the monitor, only if necessary, adjust the focus to
obtain the best picture: remove the cap cover from the top of the lens mount and
screw the lens into the lens mount until the subject is in focus and the picture is
clear.
4. Mount the camera on the mounting bracket by using the hole on bottom of the
camera.
TROUBLE SHOOTING
If problems occur with your camera, please refer to the following. If the guidelines do not
help you to solve the problem, contact an authorized dealer.
PROBLEM
SOLUTION
No video
Check the power supply and line connection between
the camera and monitor.
Dim image
Check the surface of the lens
Weak contrast
Check if the camera is exposed to too strong light
Flicker image
Check if the camera faces to the sun directly or too
strong light.
PRELIMINARY
VERSION
FEB
. 2009
