Installation Instructions
1 |
P a g e
v 1 . 0 ( 1 0 / 2 0 2 0 )
MERIDIAN II LED TABLE LAMP
SKU# 269420
Rated Voltage 12V DC 1A
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of the product. Please keep the instructions for future reference.
Warranty
•
This luminaire is covered by a 3-year warranty from the date of purchase. Please retain the proof of purchase.
•
Warranty will be void if there is any damage due to improper usage or modification to the product.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
•
Select a suitable location for this light luminaire ;
- Ensure it is on a flat and stable surface.
- This product is suitable for indoor use only.
- Do not place flammable material near or over the luminaire.
- Ensure the luminaire is not installed in direct line of an air vent/system.
- If installing a luminaire in an area prone to moisture, ensure that the area is well ventilated, and an appropriately
rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as
such is not covered under warranty.
•
Take care not to pull any electrical wires during unpacking as this may damage the connection.
•
Lay out all the components on a smooth surface and make sure no components are missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
•
Do not plug into the mains power socket-outlet before or during assembly. Only do so after the luminaire is fully
assembled and ready to use for the first time.
Installation Directions
1. Remove all packaging material from the product.
2. Select a suitable location for the light luminaire. See the installation requirements above.
3. Connect the power adaptor (C) to the quick connector (B) then insert the power adaptor (C) into the mains socket
outlet and ensure it is fully plugged in.
NOTE: Only use the power adaptor provided with the luminaire.
4. Turn the power on at the mains power socket outlet.
5. Use the touch switch (A) to turn the luminaire ON/OFF and change the scenes:
- Touch the switch for the first time, the luminaire will turn ON and set for night use (0% CCT, 20% Brightness);
- Touch the switch for the second time, the luminaire will be set for reading (50% CCT, 100% Brightness);
- Touch the switch for the third time, the luminaire will be set for work (100% CCT, 100% brightness);
- Touch the switch for the fourth time, the luminaire will be set for leisure (50% CCT, 50% brightness).
- Quickly touch the switch twice, the luminaire will turn OFF.
The scenes, brightness, colour temperature and schedule can be adjusted via the ‘Lucci CONNECT’ APP.
Set up the WIFI & in-app control according to the ‘Lucci CONNECT user guide’.
NOTE: Ensure the WIFI function of your mobile is turned on and your WIFI network is correctly installed before
setting up the luminaire. The product is only compatible with a 2.4 GHz WIFI network.
