Installation Instructions
1 |
P a g e
v 1 . 0 ( 0 9 / 2 0 1 8 )
STARLIGHT ADJUSTABLE LED DOWNLIGHT
SKU# 170740, 170741, 170742, 170743
Rated Voltage 200-240V~ 50/60Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this luminaire. Please keep instructions for future reference.
Warranty
This luminaire is covered by a 5 year warranty. The warranty is from date of purchase, not the date of installation.
If the luminaire is not assembled and installed by a licensed electrician the warranty will be void.
Please retain proof of purchase and evidence of installation by a licensed electrician for any warranty enquiries.
Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.
This luminaire is not suitable for use with dimmer switches. Warranty will be void if the luminaire is used on the same
circuit which has a dimmer switch.
Installation Requirements
Must be installed by a licensed electrician.
All wiring and installation of the luminaire must adhere to the latest local and national wiring rules.
eg. AS/NZS 3000 Electrical Installations.
This is a Class II luminaire. This must be maintained during wiring and installation.
Select a suitable location for installation:
This luminaire is suitable for indoor use only.
The mounting point must support 2 times the weight of the luminaire.
This luminaire is not suitable for dimming and should not be used with a circuit which has a dimmer.
Warranty will be void if the luminaire is used on the same circuit which has a dimmer switch.
This recessed luminaire has an insulating ceiling type IC-4 rating. Building insulation material can safely be
exposed continuously to temperatures up to 90°C may abut and cover the luminaire. (Please refer to the
Clearance Information section and the IC-4 Rating section in this instruction manual for further details)
If loose fill insulation or thermal insulation is not fixed into position or if there are loose combustible materials (e.g.
leaves or combustible materials stored in the roof space), a barrier or guard is required as per the Clearance
Information section in this instruction manual.
Take note of the clearance values. Do not remove any structural members for the installation of this luminaire.
The LED driver must be placed at least 100mm away from the LED downlight module to allow for cooling.
The LED driver can be placed under the insulation. (Please refer to the Clearance Information section in this
instruction manual for further details)
Take care not to pull any electrical wires during unpacking as this may damage the connection.
Lay out all the components on a smooth surface and make sure there are no components missing before
assembling. If parts are missing, return the complete product to the place of purchase for inspection or replacement.
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.
