Installation Instructions
2 |
P a g e
v 1 . 0 ( 0 6 / 1 7 )
Charging the Fitting
1. Open the
‘silicon cover’ at the back of the fitting.
2. Insert the cable into the
‘micro USB’ port and connect to a USB port on a computer/laptop or 5V 1A DC power adaptor.
3. A red
‘charging indicator’ will start flashing during the charging process.
4. The red
‘charging indicator’ will be ON when it has finished charging the built-in battery.
5. When the battery is charging, the power bank function cannot be used.
Power Bank Function
1.
Open the ‘silicon cover’ at the back of the fitting.
2.
Insert the cable into the ‘USB’ output port to begin charging your mobile phone. USB power output: 5V 1A.
3.
A green ‘charging indicator’ will be ON when the fitting is charging a device.
4.
If the green ‘charging indicator’ begins to flash the built-in battery is low and cannot charge the external device
anymore. Please re-charge the fitting.
White Light Function
1. Short press to turn the white light ON.
2. Press and hold to dim the light or adjust the brightness level. (there is no memory function for brightness level)
3. Short press to turn the light OFF.
Colour Light Function
1. Short press to turn the colour light ON.
2. Press to change the colour. There are seven different colours to select.
3. Press and hold for automatic colour changing mode. It will continuously cycle through the different colours.
4. Short press to turn the colour light OFF.
Auxiliary Line-In Function
1.
Open the ‘silicon cover’ at the back of the fitting.
2. Insert a 3.5mm audio cable into the Auxiliary Line-In port.
3. Press to turn ON. The blue status will turn on and the fitting is in auxiliary line-in mode.
4. During auxiliary line-in mode:
Short press to mute the sound.
Short press to increase volume. (Skip to next track function will not work during auxiliary line-in mode)
Short press to decrease volume. (Skip to previous track function will not work during auxiliary line-in mode)
5. Press and hold to turn OFF. There will be a descending power-down tone.
