Installation Instructions
4 |
P a g e
v 1 . 0 ( 0 3 / 2 0 2 0 )
SENSOR SWITCH SETTINGS:
DURATION TIME:
The time of the light remain switched on after activation can be adjusted from 8 secs to 60 secs. Adjust
the timer switch clockwise to the minimum position then the fitting will activate and last 8 secs before turn off. Adjust the
timer switch anti-clockwise to the maximum position then the fitting will activate and last 60 secs before turn off.
LUX LEVEL:
The lux control module has a built-in sensing device (photocell) that detects daylight and darkness. Adjust
the lux-level switch anti-clockwise to the minimum position then the fitting will work at both day and night. Adjust the lux-
level switch clockwise to the maximum position then it will only work at night.
NOTE: If you want to test the detection area of the PIR sensor, please wait for the ambient light level is below 30 lux.
Safety tips
•
Do not drop or make impact onto the luminaire.
•
Do not turn on the ON/OFF switch during transportation or any faulty conditions (battery leakage, control unit box
damaged / burned / high temperature).
•
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire
will need to be replaced.
•
Dispose of exhausted batteries immediately and safely (so they cannot be retrieved by children). Contact your local
council to safely dispose of the battery.
Specifications
SKU #
240780
Colour
Black
Rated Voltage
3.7V DC
Rated Wattage
8W
LED Specs
500 lumen, CCT 3000K, CRI > 80, Non-dimmable
IP Rating
IP44
Battery
2 x 18650 (3.7V, 2000mAh) Rechargeable Li-battery (included)
PIR Sensor
Detection range & angle: Max.10M, 110°
Required installation height: 1.8 – 2.5M
Lux & Time adjustment: 30 – 1000lux, 10s – 60s.
Weight
0.9kg
Dimensions
H:275mm W:250mm E:230mm
