Installation Instructions
1 |
P a g e
v 1 . 0 ( 0 6 / 2 0 2 0 )
TOWER SOLAR BOLLARD/TABLE LAMP WITH SENSOR
SKU# 229160, 229161
Rated Voltage 3.7V DC, 2W
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this product. Please keep instructions for future reference.
Warranty
•
This luminaire is covered by a 3-year warranty valid for in-store replacement or refund only.
•
The warranty period starts from the date of purchase. Please retain the proof of purchase.
•
The warranty is for the luminaire only and does not include the rechargeable battery.
•
Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
•
Select a suitable location for installation:
−
This product is suitable for outdoor use only.
−
The mounting point must support 2 times the weight of the luminaire.
−
This luminaire is protected against water penetration to IP54 standards, which is splashing water from any
direction.
−
The solar panel must have access to direct sunlight to recharge the battery. Avoid any areas where there is
possible shading on top of the solar panel.
−
Depending on the luminance of the sun, the charging time required for the battery is approximately 5.5 hours.
−
See the
Sensor Information
section on the next page, for additional information about the sensor detection
range and sensor sensitivity, to select a suitable installation location.
•
The luminaire must not be used if the protective shield or shade has been cracked or damaged. Replace the
protective shield or shade before using the luminaire.
•
Lay out all the components on a smooth surface and make sure no components are missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
