Installation Instructions
3 |
P a g e v 2 . 1 ( 1 2 / 2 0 1 9 )
INSTALLING THE GROUND LIGHT WITH MOULDED BOX (refer to diagram below)
1.
Ensure power to the circuit you are working on has been switched OFF, before commencing the installation. (Fig.1)
2.
Take the luminaire out from the moulded box.
3.
Cut an installation hole of Ø84mm into the mounting point. (Fig.2)
4.
Insert the moulded box into the mounting point. Fig. 3
5.
Connect the luminaire to the Lucci wiring kit (SKU# 220826, 220827 - sold separately). Ensure the connector is fully
tightened. (Fig. 4)
NOTE: The wiring kit is rated for Max. 80VA load only
6.
Connect the Lucci wiring kit (SKU# 220826, 220827 – sold separately) to the Lucci transformer (SKU# 220818, 220818,
220829 – sold separately). (Fig. 4)
NOTE: Do not exceed the load of the Lucci wiring kit and Lucci transformer
which are rated 80VA, 28VA and 10VA load respectively.
7.
Install the luminaire into the moulded box. (Fig. 5)
8.
Insert the transformer plug (not included) into mains power socket outlet (not included) and ensure it is fully plugged
in. Switch on the luminaire to test all the lighting functions and enjoy your new luminaire. (Fig. 5 & 6)
