Airfusion QUEST II Installation Instructions
6 |
P a g e
BLADE INSTALLATION
BLADE ATTACHMENT (Fig. 4)
1.
Before installing the blades, remove the blade screws that pre-installed on the fan motor assembly.
2.
Install the blade to the blade holder by
tightening the blade holder screw and nut set using the included
allen key.
3.
Insert the hook of the blade holder into the square hole of motor.
4.
Align the 2 mounting holes on the blade holder to the 2 mounting holes on the fan motor assembly and
using the 2 blade screws (removed in step 1) to secure the blade to the fan motor assembly.
5.
Ensure the screws are tightened equally and evenly to reduce the chance of warping or unbalancing.
Take care not to over tighten the screws as this can damage the blades.
6.
Once completed, repeat the process on the remaining blades
Fig. 4
