background image

1/4"-20 Nylock Nut

Tilt Screw Installation

TH100200W Wall Arm

4Pl. 1/4" Belleville Washers

(Curved Side Facing Out)

2Pl. 1/4" Flat Washer

1/4"-20 x 2" 

Hex Button Head Screw

VESA Plate Tilt Slot

Shown with 32" screen using a 

200mm x 200mm mounting pattern

(Screen Not Included with Mount)

Screen Installation

TH100200W Mount

4Pl.  6mm x 12mm 

or 8mm x 20mm

Phillips Screws

2Pl.  1/4" or 8mm 

Flat Washers

TH100200W Short Arm

Pivot Screw

Optional Short Arm Installation

Tilt Screw Installation

Install the 1/4"-20 Hex Head Screw through the VESA Plate

Tilt Slot with the Washers and Nylock Nut oriented as shown

in the illustration.

Tighten both the pivot and tilt screws with enough torque

for the desired ilt angle and tilting tension.  These screws 

can be left loose enough to allow the screen to be tilted 

after installation or tight enough to prevent the screen tilt 

from being adjusted after installation.

Note:  The curved 1/4" Belleville Washers should be installed

with the curved side facing out (away from the wall arm) to 

facilitate smooth tilting action.

Screen Installation

(Check with the monitor manufacturer's documentation

to make sure that the provided 6mm x 12mm screws or

8mm x 20mm screws are suitable for installation. Longer 

or shorter screws may be needed.  Setscrews with washers 

and nuts can also be used for screens with recessed 

threaded inserts when needed.  Contact Lucasey 

Manufacturing if a different size and/or

length of monitor attachment screw is needed.)

Screw the top two Phillips screws into the back of the 

screen leaving a 1/4" gap between the back of the screen 

and the screw head.

Hang the screen onto the TH100200W VESA Plate with the

top top screws.

Attach the bottow two holes with Phillips Screws & 

Washers. 

Tighten the top two screws.

Optional Short Arm Installation

If installing the TH100200W Short Arm, remove the Pivot 

Screw and replace the 6" projection wall arm with the 

shorter 3-1/2" projection wall arm.

Protected under one or more of these U.S. Patent numbers: 3,291,432  3,559,942  3,724,798  DES.270,689  4,613,109  4,878,645  4,852,842  DES.309,5624,973,023  5,169,114  5,255,884  5,310,152  5,522,576  5,621,614  Re.35,677   DES.398,834  5,826,384  5,941,492  5,964,068  6,060,661  6,102,398  6,158,704 6,454,116B1 6,761,276B2 6,806,425B1

TH100200W INSTALLATION INSTRUCTIONS       Page 2 of 3

©2013 Lucasey Manufacturing Corporation, Oakland, California                                                                                            www.lucasey.com

TH100200W Wall Mount Installation

TH100200W_Ins  (5/13)

Reviews: