(4PL.) 5mm x 6mm Phillips Machine Screws
(6PL.) #4 x 3/8" Phillips Flat Head Tapping Screws
Step 7
Top Plate Assembly
with LG Monitor Base
Bottom Plate with Rivets
Step 8
Step 9
(4PL.) 4mm x 25mm
Pin Head Security Screws
LG1507K Release Key Sold Separately
with 5/32" Hex Key Security Screw Tool
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
Page 2 of 2
Align the Release Key with the middle of the mount
and Slide the Release Key between the Top Plate
Assembly and the Bottom Plate.
Once the Release Key is inserted all the way, the
top and bottom plates will release from each other
by lifting up and back with the monitor attached
to the LG1507 Top Plate.
Monitor Removal
7.
8.
9.
Attach the LG1507 Top Plate to the LG Monitor Base
with the provided 5mm x 6mm Phillips Machine
Screws & #4 x 1/2" Phillips Tapping Screws
Align the slots on the Top Plate Assembly with the
rivets on the Bottom Plate. Pull forward on the Top
Plate Assembly to lock the two plates together.
Double check that all of the rivets have properly
seated by lifting up on all four corners of the Top
Plate Assembly. Push the Top Plate Assembly back
to make sure the attachment is secure.
Note: Aligning the mount plates with the monitor
attached to the monitor base is not recommended.
Attach the LG Monitor to the Monitor Base with the
provided 4mm x 25mm Pin Head Security Screws.
Follow the LG instructions for attaching the Monitor
Base to the LG Monitor.
(Security Screws Require a 5/32" Hey Key with Hole
to install and remove, sold separately with the
LG1507K - Release Key)
LG1507A_Install (8/11) ©2011 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
LG1507A INSTALLATION INSTRUCTIONS
