WARNING: Improper installation can result in serious personal injury. It is the responsibility of the installer to ensure
that all safety precautions are taken during the installation and that all safety features of the mount are properly utilized.
WARNING: The structure to which the mount is attached needs to be capable of supporting five times the stated load limit.
Additional reinforcement of the structure may be necessary and a certified architect
or engineer is needed to make this determination.
WARNING: Take into consideration the combined weight of the mount, the monitor and any auxiliary equipment when
determining the total load on the wall and mount.
WARNING: Do not place your fingers between movable parts on the LC6X4WTM mount. The LC6X4WTM Back Plate
and VESA Mounting Plate, when adjusting the tilt or putting the monitor in place, create pinch points that can
cause injury.
WARNING: Make sure that the screws used to attach the monitor to the mount are the appropriate size and length. An
assortment of monitor attaching screws are provided for convenience. The appropriate screws to use for mounting the
monitor is determined by the monitor manufacturer. Failure to use the screws recommended by the monitor manufacturer
can result in the monitor dropping from the mount and/or damage to the electronic components inside the monitor.
Page 1 ... Title Page & Product Description
Page 2 ... Warnings, Item List & Tools Required
Page 3 ... Dimensional Drawings
Page 4 ... Installation Instructions for LC6X4WTM Wall Plate
Page 5 ... Installation Instructions for Monitor Attachment
Page 6 ... Tilt Adjustment, Monitor Removal & Warranty
Table of Contents
Stud Finder
Drill with 1/8"Drill Bit
Phillips Screw Driver
1/4" Socket Driver w/ 1/4" Socket
1/4"Socket Extension 12" - 16"
5/32" Hex Driver for 1/4" Socket
(optional security tool 5/32" Hex
Driver with hole for 1/4" Socket)
4 ...
8 ...
4 ...
8 ...
4 ...
8 ...
4 ...
8 ...
24 ...
12 ...
12 ....
4mm x 40mm Set Screws
4mm Hex Nuts
5mm x 40mm Set Screws
5mm Hex Nuts
6mm x 40mm Set Screws
6mm Hex Nuts
8mm x 40mm Set Screws
8mm Hex Nuts
5mm Flat Washers
8mm Flat Washers
1/4" Flat Washers
Monitor Attaching Screw Assortment
1 ...
1 ...
2 ...
8 ...
4 ...
6 ...
LC6X4WTM Wall Plate
LC6X4WTM VESA Mounting Plate
400mm Spacers
#10-24 x 1" Socket Head Cap Screws
#10-24 x 3/8" Button Head Screw with Security Pin
#14 x 2-1/2" HWH Lag Screws
Tools Required
Item List
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
Page 2 of 6
LC6X4WTM INSTALLATION INSTRUCTIONS
LC6X4WTM (9/09) ©2009 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
