- 25 -
D370-019
2.2.
L
OADING USING THE HYDRAULIC DOOR
(
OPTIONAL
)
2.2.1. Loading, via the rear door, of feed in round bales
Line up with the bale to be loaded.
Lower the tailgate.
The hoop must be resting on the ground and the clearance between the tailgate and the
ground must be 2 cm.
The PICKING DOOR is designed for loading round bales from the floor, which the user
must roll onto the door, prior to putting it into the machine (see diagram below)
Owing to a lack of visibility, we would strongly advise that you DO NOT use the door with
auto loading. The maximum diameter of bales that can be loaded is 1.80 m.
Round bales of straw or hay with a diameter in excess of 1.50 m : two in the box and
one potentially on the rear door.
Round bales of straw or hay with a diameter smaller than 1.50 m : up to 3 bales in the
box and potentially one on the hydraulic door
Tied round bales : One bale in the box and one on the hydraulic door
Tied rectangular bales : one bale in the box
