x 5
C
A
P P
U
C C
I
N O
S
Be sure to make the coffee for your
cappuccino first, before steaming the milk.
(After steaming, the machine will be too hot
and you’ll have to wait for the temperature to
return to the coffee range). In order to
generate steam, press the steam switch (11).
The temperature pilot light (5) lights up. After
approx. 30 seconds or when the light goes
out, the machine is ready.
1
Turn the steam valve (12) slightly in an anti-
clockwise direction and allow any residual
water to exit the nozzle (13) until steam
starts to exit. Now close the steam valve
(12).
2
Place a container of milk under the steam
exit nozzle (13) and immerse this slightly
into the milk. Now open the steam valve
(12) to obtain the required steam.
A small opening above the nozzle enables a
small amount of air to be drawn in, which then
mixes with the milk causing the desired
frothiness for a cappuccino. If this does not take
place, lower the position of the container so
that the air intake opening (13) is not covered
by milk. We recommend that very cold milk is
used. If, after the preparation of one or more
cappuccinos, you want to make another coffee,
it will be necessary to get the machine back to
the correct coffee temperature. To do this
quickly, make sure the steam switch is not
depressed (11). Open the steam valve (12), run
the pump by pressing the coffee switch (10) and
letting the water flow. This brings cold water
into the boiler and quickly brings the machine
to the optimum coffee temperature. When the
temperature light goes on, close the steam
valve (12) and switch the pump (10) off. When
the temperature pilot light goes out, the
machine is ready to prepare the next coffee.
P
r
e
p
a
ring
on
e
o r
s
e
v
e
r
a
l
ca
ppu
cc
inos
I
M
P
O
T
A
N
T
:
PLEASE FOLLOW THESE INSTRUCTIONS AND SEQUENCE
EXACTLY!
x 5
S
T
E A
M
A
N D
W A
T
E
R
S
t
e
a
m
The X5 can generate steam or hot water for
the preparation of cappuccino or tea. In order
to generate steam, press the steam switch
(11). The temperature pilot light (5) will light
up. After approx. 30 seconds or when the light
goes out, the machine is ready to make
steam.
Before beginning to steam milk, holding a
cloth at the end of the steam arm and open
the valve to release the water that has
accumulated.
CAUTION DANGER OF SCALDING!
H
ot
w
a
t
e
r
To make hot water, wait until the temperature
pilot light (5) has stopped flashing. Open the
steam valve (12) in an anti-clockwise direction
and press the coffee switch (10). When the
desired quantity of hot water is reached, press
the coffee switch (10) and close the steam
valve (12) in a clockwise direction.
C
A
U
T
I
ON:
the Nozzle of the steam outlet (13)
is extremely hot during steam release!
DANGER OF SCALDING!