E7
TECHNICAL
DETAILS
INTENDED USE
FACTORY SETTINGS
TOOL USE
EXPLODED AND
PARTS LIST
OPERATION
TROUBLE
SHOOTING GUIDE
RESET
RESET
RESET
AUTO
AUTO
AUTO
C-2. Value Setting
The Meter allows the Operator to store 5
different PRESET values (AUTO 1...AUTO
4), which can be recalled without having to
set them each time with the numeric keys.
Press and hold once to set the
function.
The Meter will display:
Blinking
Index of the PRESET value AUTO 1
When the value is blinking, press to
select preset 1-4, then press the numeric
buttons to set the value.
Blinking message will be:
Press to confirm the value and quit
the setting mode, the setting value will be
stored.
By holding on the keys the value continues
to vary.
RESET
RESET
AUTO
AUTO
C-3. Unit Setting
The Meter allows the user to select one of
the following measurement Units:
• QTS = QUARTS
• PTS = PINTS
• LIT = LITERS
• GAL = GALLONS (U.S. Gallons)
Press and hold two times to set
the function.
The Meter displays:
When the unit is blinking, press to
select unit L, GAL, PT or QT.
Press to confirm the value and quit
the setting mode, the setting value will be
stored.
NOTE:
The above mentioned measurement
units refer to the Batch total indicators.
• If you select the unit LITERS,
the TOTALS
will be displayed in LITERS.
• If you select the unit GALLONS, PINTS or
QUARTS,
the TOTALS will be displayed
in GALLONS.
• The modification of the measurement unit
does NOT require a new calibration.
• If the TOTAL indicates a value other than
zero, this value is automatically converted
from one unit to another unit.
62.50
L
Lit
TOTAL
AUTO
62.50
L
Lit
TOTAL
AUTO
4see
62.50
L
Lit
TOTAL
AUTO
3see
AUTO
AUTO
AUTO
00.00
2see
L
Lit
AUTO
see
Lit
Blinking
see
Gal
PT
QT
Lit
OK/STOP
OK/STOP
OK/STOP
OK/STOP
OK/STOP
Attention: In order to preserve the unit setting,
must be hold for 2s after
accomplishing setting and programme will be
saved until the start of next function setting.
If it is necessary to preserve the setting in
flash in case of power-off, wait for 30s without
operation until the screen disappears and the
setting will be written in flash then.
OK/STOP
