3.6 How to Operate the Handle (Operation and P.D.I.)
(1) Disengage the handle with the handle stop.
(2) Move the handle to and fro to feed grease.
(3) When the handle can no longer be pulled toward you, feeding of grease has been completed. (Completion
of grease feed).
(4) After completing grease feeding, push the handle until it touches the tank in order to reduce pressure. In the
case of EGH-2C, the handle does not tilt to the extent it touches the tank. If pushed toward the tank, it stops
moving forward. Stop pushing at that point.
3.7 How to Replace the Cartridge (only for cartridge type models)
(1) Pull up the chain (so that a new cartridge can be inserted) and hook the
chain to the tab on the top of the cover (the point indicated by the
arrow in the drawing on the right).
(2) Turn the cover by hand and remove it from the pump.
- 6 -
(3) Remove the empty cartridge from the pump, and mount a new
cartridge paying appropriate attention so as not to allow air and foreign
substances to enter.
注意銘板
Caution
plate
* Use the same brand and same grade of grease.
(4) Mount the cover to the pump again and tighten it by hand.
(Position in which the seal comes to the front)
(5) Pull up the chain to remove from the tab and move it down slowly.
Note: Put the chain completely in the cover.
Note: For types without a spring, steps (1) and (5) are not necessary.
