1
Introduction
■
System Application
This Pneumatic Lubrication Pump “PM-8S-18LP ” is
designed to lubricate each point on a machine by delivering
relatively small amount of grease through a metering valve.
Do not use this system for any other purposes.
■
Marks used in Manual
In this Manual, safety precautions are provided using the
marks below in order to prevent accidents which might cause
injuries to human bodies. Be sure to carefully read these
safety precautions to understand the contents thoroughly
before handling the pump.
In addition to the above, the marks below will also appear in
this Manual. Please read the following explanation in order
to handle the pump correctly.
Indicates referential information or points to
which special attention should be paid while
handling the pump. If ignored, the pump and/or
the machine could be damaged.
Indicates referential information or points
which are helpful for handling the pump.
Indicates a reference clause.
Indicates a potentially hazardous
situation which, if ignored, could result
in death or serious injury.
Indicates a potentially hazardous
situation which, if ignored, may result
In minor or moderate injury.
ＷＡＲＮＩＮＧ
ＣＡＵＴＩＯＮ
