AHE00046EN 2002
5
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
2.3 Options
• Electric defrost (E)
For cold rooms with room temperatures below 4 °C and frost build-up is likely, the application of
a defrosting system is advised. Electric defrost for Optigo CD consists of stainless steel heater
elements mounted in both coil and driptray (CD300 driptray only). The defrost elements are
con-nected to separate terminals in the terminal box.
• Driptray insulation 12 mm + cladding (IS)
Available for CD400 only.
• Coil protection
- Pre-coated aluminium fins (EP)
- Cataphoresis treatment (CA)
• Stainless steel casing and frame (SS)
• Re-heating coil (RH)
Available for CD300 only.
• Switch on/off (SW)
• Fan motors wired to connection box (CB)
2.4 Code description
CD W H E 40 2 .2
B S *
BOP
PC A
CB - AL 4.0 CU IS
1
2
3
4
5
6 7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
Commercial air cooler - dual discharge
Refrigerant system (W=brine, X=CO
2
DX)
Fan speed (H=high speed, L=low fan speed)
Fan motor type (blank=AC, E=EC)
Fan diameter (30=300, 40=400 mm)
Number of fans (1 to 4)
CD version
Tube rows code (B, C)
No. of phases (S=1, T=3)
10
No. of circuits
11
Packing (BOP=box + pallet, CR=crate)
12
Casing material (PC=epoxy coated aluminium, SS=stainless steel)
13
Defrost system (A=air defrost, E=electric defrost)
14
Connection box (blank=without connection box, CB/CBM=with connection box)
15
Fin material (AL=aluminium, EP=epoxy coated aluminium, CA=cataphoresis)
16
Fin spacing (4, 5.5, 7, 10 mm)
17
Tube material (CU=copper)
18 Options
Summary of Contents for ALFA Optigo CD
Page 20: ...alfa luvegroup com ...
