29
4
-
-
LINE LOCK
PHASE
MODE
OFF
4
15
Press SET to Return
4
MOTION DET:
If you connect an alarm device to this
camera, you can monitor activity
more efficiently, because a signal is
generated by the camera whenever
motion is detected.
1) When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the arrow indicates ‘MOTION DET’.
2) Set up the mode using the Function Setup switch.
- SENSITIVITY :
You can select up to 8 MD areas. When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small
movement.
- AREA MODE :
Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS :
Determines which of the 4 vertices of each MD area is to be used.
Determines the coordinate of the horizontal axis for SEL POS.
- XPOS :
- YPOS :
Determines the coordinate of the vertical axis for SEL POS.
- FILL
SET :
→
Fills in a selected MD area. Fills in a selected MD area. The color of filling
is sequentially selected as brown, orange, blue, cyan, yellowish green,
yellow and red.
- RETURN :
Select this to save the MOTION DET menu settings and return to the
SPECIAL menu.
MOTION DET
2.AREA MODE
L-TOP
AREA1
ON
3.SEL POS
5.YPOS
4.XPOS
6.FILL
SET
→
7.RETURN
1.SCNSITIVITY
4
3
5
30