LTS LTN8704-P4, User Manual

Page: 157 / 217

User Manual of 87XX-P Series NVR
157
3. Check the checkbox of Enable High-speed Download . And click the OK button in the pop-up message box
to confirm the settings.
Figure 11. 39 High-speed Download Settings Menu
Figure 11. 40 Message Box of High-speed Download
4. Click Apply button to save and exit the interface.
11.2.13 Configuring Virtual Host
Purpose:
You can directly get access to the IP camera management interface after enabling this function.
The Virtual host function can be only configured through the web browser.
Steps:
1. Enter the Advanced settings interface, as shown in the Figure 11. 41.
Configuration > Remote Configuration > Network Settings > Advanced
Figure 11. 41 Advanced Settings Interface
2. Check the checkbox of the Enable Virtual Host .
3. Click the Save button to save the setting.
4. Enter the IP camera management interface of NVR. The Connect column appears on the right-most side of
the camera list, as shown in the Figure 11. 42.
Configuration > Remote Configuration > Camera Management > IP Camera