manualshive.com logo in svg

LTS LTN7616, Instruction Manual, Page: 35 / 56

Share
Download
LTS LTN7616 Instruction Manual Download Page 35

User Manual of DS-9600/8600/7700/7600 Series NVR 

 

105 

7.1

 

Backing up Record Files 

7.1.1

 

Quick Export 

Purpose: 

Export record files to backup device(s) quickly. 

Steps: 

1.

 

Enter Video Export interface. 

Menu>Export>Normal 

Choose the channel(s) you want to back up and click 

  button. 

Note:

 

1)

 

The time duration of record files on a specified channel cannot exceed one day. 

Otherwise, the message box “Max. 24 hours are allowed for quick export.” will pop up. 

2)

 

The number of channels for synchronous export cannot exceed 4. Otherwise, the 

message box “Max. 4 channels are allowed for synchronous quick export.” will pop up. 

 

Figure 7. 1

 

Quick Export Interface

 

2.

 

Click on the 

  button to start exporting. 

Note: 

Here we use USB Flash Drive and please refer to the next section Normal Backup 

for more backup devices supported by the device.

 

 

Figure 7. 2

 

Quick Export using USB1-1

 

Stay in the Exporting interface until all record files are exported. 

Summary of Contents for LTN7616

























































Reviews:

No comments