©2020 LT Security, Inc. | [email protected] | www.LTSecurityinc.com
Quick Setup Guide
Package Contents
1)
LTAH1070EK-TX/LTAH1070EK-RX: 1 set 4) User manual: 1pc
2)
Infrared module (receiving and transmitting): 1 set 5) USB cable: 1pc
3)
12V/1A power adaptor: 1pc
Installation Steps
1.
Connect the male end of HDMI cable to video source.
Connect the female end of HDMI cable to “
HDMI IN
” of LTAH1070EK-TX.
Connect UTP cable to RJ45 port of LTAH1070EK-TX.
Connect the other end of UTP cable to RJ45 port of LTAH1070EK-RX.
2.
Video source is the operable and controllable devices with USB like desktop PC and so on.
Connect one end of USB line to video source and connect the other end to LTAH1070EK-TX.
Video source is the devices with infrared control like blue-ray machine.
Connect infrared emission module to “
IR OUT
” port of LTAH1070EK-TX.
3.
Use another HDMI cable, connect the male end to “
HDMI OU
T” of LTAH1070EK-RX,
then connect the other end to a display device which has an HDMI interface;
According to different video source devices, please insert the keyboard and mouse which are with USB
interface into the USB port or insert an IR receiver module to the “
IR-IN
” port.
