![background image](http://html1.mh-extra.com/html/lts/cmip7442w-28m/cmip7442w-28m_user-manual_1945237098.webp)
User Manual of Network Camera
98
Figure 10-13
Import/Export Configuration File
10.6.4
Upgrading the System
Steps:
1.
Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or
Configuration > Advanced Configuration> System > Maintenance
2.
Click
Browse
to select the local upgrade file and then click
Upgrade
to start
remote upgrade.
Note:
The upgrading process will take 1 to 10 minutes. Please don't disconnect
power of the camera during the process. The camera reboots automatically after
upgrading.
Figure 10-14
Remote Upgrade
10.7
RS-232 Settings
Purpose:
The RS-232 port can be used in two ways:
Parameters Configuration: Connect a computer to the camera through the serial
port. Device parameters can be configured by using software such as
HyperTerminal. The serial port parameters must be the same as the serial port
parameters of the camera.