2.2.2 Ceiling/Wall Mounting with Gang Box
You need to purchase a gang box separately if you adopt celling
Take apart the gang box and align the screw holes of
the bullet camera and the gang box cover.
Figure 2-8 Gang Box
Route the cables through the cable hole of gang box
and fix the camera with the gang box cover with the
supplied screws, as shown in Figure 2-9.
Screw
Gang Box Cover
Figure 2-9 Fix the Camera with the Gang Box
Drill the screw holes in the ceiling/wall according to
the supplied drill template.
Hammer the supplied screws into the screw holes to
fix the gang box to the ceiling/wall.
Screw
mounting.
Steps:
1.
2.
3.
4.
Figure 2-10 Fix the Camera to the Ceiling
5.
Connect the corresponding cables and install the
gang box cover with fixing screws.
Figure 2-11 Fix the Camera to the Ceiling/Wall
6.
Refer to step
5
of
to adjust the camera to get
an optimum angle.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
