Quick Operation Guide of 0700/8800/8700 Series NVR
4
Steps (for 8700 and 8800):
1.
Remove the cover from the NVR by unfastening the screws on the rear and side panel.
2.
Connect one end of the data cable to the motherboard of NVR and the other end to the HDD.
3.
Connect the power cable to the HDD.
4.
Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]