LTS Security POE-SW1602N, Quick Start Manual, Page: 11 / 15

16/24-Port 100M Long-Range PoE Switch Quick Start Guide
6
2.2.3 Lightning Protection
In thunderstorm weather, a sudden strong current may damage the switch. To protect your switch
from lightning strike or strong current, please:

Make sure the switch, rack, installa ti on desktop, and power socket on the wall all are
well-grounded.

Route the switch cables properly.

If you need to route cables outdoors, it is advised to use a lightning arrester.
2.2.4 Installation Position
No ma tt er whether your switch is installed on a rack or desktop, follow the instruc ti ons below:

Make sure the rack or desktop be stable and fi rm enough.

The room must be well-ven ti lated. Keep at least 10 cm distance between all sides for cooling.

Do not place any heavy or big-size object on the switch.

Keep at least 1.5 cm ver ti cal distance between each switch while installing it on a rack.
2.3 Installation
POE-SW1602N and POE-SW2402N switches support rack installa ti on. Follow the steps below for
rack installa ti on .
The following panel is the front panel of the switch. For details about the ports, see secti on
Appearance
.
Step 1 Check the grounding and stability of the rack.
Step 2 Use the a tt ached screws to fi x two L-shaped brackets to the sides of the switch.
Figure 2-1 Install L-Shaped Bracket
Step 3 Place your switch on the rack, fi x it to the rack with self-prepared screws, and ensure the
stable installa ti on of your switch to the rack.