Network Video Recorder User Manual
141
12.13 Thermal Camera Detection
The NVR supports the event detection modes of the thermal network cameras: fire and smoke
detection, temperature detection, temperature difference detection, etc.
Before you start
Add the thermal network camera to your device and make sure the camera is activated.
Step 1
Go to
System > Event > Smart Event
.
Step 2
Select a thermal camera from the camera list.
Step 3
(Optional) Check
Save VCA Picture
to save the captured pictures of detection.
Step 4
Select an event detection (Temperature, etc.).
Step 5
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 6
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 7
Click
Apply
.