LTS Security LTD3216C-PL, User Manual

Page: 218 / 353

Local Configurations 208
Figure 5-179
Step 4 Configure the settings for alarm linkage. For details, see Table 5-52.
Table 5-52
Parameter Description
Name Enter the customized alarm name.
Period
Click Setting to display setting interface.
Define a period during which the motion detection is active. For details,
see "Setting Motion Detection Period" section in "5.10.4.1 Configuring
Motion Detect Settings."
PTZ
Click Setting to display the PTZ interface.
Enable PTZ linkage actions, such as selecting the preset that you want
to be called when an alarm event occurs.
Alarm Out
Click Setting to display setting interface.

General Alarm: Enable alarm activation through the alarm devices
connected to the selected output port.

External Alarm: Enable alarm activation through the connected
alarm box.

Wireless Siren: Enable alarm activation through devices
connected by USB gateway or camera gateway.
Latch
Set a length of time for the Device to delay turning off alarm after the
external alarm is cancelled. The value ranges from 0 seconds to 300
seconds, and the default value is 10 seconds.
Post Record
Set a length of time for the Device to delay turning off recording after
the alarm is cancelled. The value ranges from 10 seconds to 300
seconds, and the default value is 10 seconds.
Anti-Dither
Configure the time period from end of event detection to the stop of
alarm.