Local Configurations
105
Figure 5-73
Step 2 Configure the channels.
Analog Channel: Select the transmission medium such as CVI, CVBS, and then
follow the onscreen instructions to complete the settings.
IP Channel: You can enable the IP channels by disabling the corresponding analog
channels. The Device also provides expanded IP channels for your use, such as
the
17–32
channels in Figure 5-73.
The 17–32 channels are only for IP camera and the range changes dependent on
the model you purchased.
The channel selection for analog camera or IP camera are in sequence, for
example, if you want to select channels for IP camera, you need to select from the
last channel number Channel
16
first, which means, you cannot jump to select the
channel
15
directly until you have selected the channel
16
.
Step 3 Click
Apply
and
follow the
onscreen instructions to complete the settings.
5.5.6 Upgrading Coaxial Camera
Step 1 Select
Main Menu > CAMERA > COAXIAL UPGRADE
.
The
COAXIAL UPGRADE
interface is displayed. See Figure 5-74.
Summary of Contents for LTD3216C-PL
