This is the fastest way to get something out from your PBM8, if you have a keyboard
and a microphone.
a. Plug the microphone into Channel 1 MIC IN.
b. Turn down AUX and LEVEL controls on the input channel.
c. Turn down MONITOR and MAIN master controls.
d. Put the EQ controls on center position.
e. Connect 2 passive cabinets to the rear speaker cabinets or 2 active cabinets to
the front MAIN OUT connectors.
f. Turn on your PBM8.
g. Sing or speak into the microphone with normal volume and adjust the channel
LEVEL control of half.
h. If you like, you can add some equalization at this stage.
i. Turn up the MAIN LEVEL control until you reach the desired volume. The +10 LED
on the Master LED meter should flash only occasionally, otherwise you will hear the
distortion. If this LED is not active and you still hear distortion, please turn down a
little the input LEVEL control or reduce the output level of your source instrument.
j. Connect your stereo keyboard into channel 7/8 and repeat the sequence.
Here you are. It is your first gig with your PBM8.
3
3. QUICK START
Summary of Contents for PBM8.250/ MKII
Page 19: ...17 7 BLOCK DIAGRAM...
