- 18 -
FIRMWARE UPGRADES
6.1 Firmware Upgrades
The manufacturer reserves the right to upgrade the camera and the firmware. Follow the
steps below to implement the upgrades:
Back up the contents in the SD card on your computer.
Install batteries and the SD card into the camera.
Format the SD card on the camera.
Retrieve the SD card and plug it in your computer (SD card reader may be
needed). Copy and paste the FW3310.bin file in the root directory of the SD
card. (Consult with the national distributor if there is an upgrade available and
where to download it.)
Retrieve the SD card and lock it, insert SD card back into the camera. Switch
camera to TEST mode. For Ltl-3310A, the “
Update FW3310.bin Successfully
”
would be shown on the TFT LCD screen.
Retrieve card, and unlock it. Switch camera to TEST mode again, the source
program FW3310.bin would be deleted automatically.
For Ltl-3310A, insert the SD card into the SD card slot. Enter
MENU,
navigate
the marker to
DEFAULT SET,
and press
OK.
For Ltl-3310B, please format the
SD card in other ways.
Re-format the SD card on the camera or in other ways. The upgrade will have
been completed.
Attention: The firmware upgrade program for one model is not compatible with
other models. In other word, an upgrade for Model Ltl-3310A/B only applies to
that model. If a camera is accidently upgraded by running a non-compatible
program, it would quit working and need to be sent back for repair. This is not
covered under warranty.
LTL
ACORN
®