8
3.4
Automatic Programming Setting (AUTO)
Find
【
AUTO
】
menu and press
【
ENTER
】
to enter automatic programming setting.
Press
【
UP/DOWN
】
button to select
【
AT.01~02
】
2 kinds of auto-program. Press
【
ENTER
】
to confirm
your setting.
After setting lighting fixture's automatic operation, restart the lighting fixture's power supply. The
setting was preserved. Exit menu, automatic operation setting will be removed.
Note: When entered this sub-menu, the fixture will automatically be set to
the data status sent by the master, and the one user operating to be the
master and other fixtures linked (by DMX cable) are slaves. At this time,
please disconnect the DMX512 signal sent from the consoles.
3.5
DMX Address Settings (DMX Address)
Press
【
MENU
】
to find
【
DMX Address
】
menu and press
【
ENTER
】
to enter address code setting.
Press
【
UP/DOWN
】
button to select DMX address code.
Press
【
ENTER
】
to confirm or
【
MENU
】
to exit. The setting will be automatically saved.
3.6
DMX Channel Mode Design (PERS)
Find
【
PERS
】
menu and press
【
ENTER
】
to enter DMX channel mode setting.
Press
【
UP/DOWN
】
button to select
【
2CH, 3CH
……
】
6 kinds DMX channel modes.
Press
【
ENTER
】
to confirm or
【
MENU
】
to exit. The setting will be automatically saved.
3.7
Function Settings (SET)
Find
【
SET
】
menu and press
【
ENTER
】
to enter function setting.
Press
【
UP/DOWN
】
button for selection,
【
REST
】
restore factory settings,
【
DIM
】
dimming mode setting.
Parameters upload and restore factory settings require a password to enter. The password is
【
UP +
DOWM + UP + DOWM + ENTER
】
.
【
REST
】
restore factory settings, enter the password correctly, function settings and parameters will
restore the factory settings.
【
DIM
】
dimming mode setting,
【
OFF
】
means non-linear dimming closed,
【
DIM1~8
】
means 8 kinds
of non-dimming speed optional.
Press
【
ENTER
】
to confirm or
【
MENU
】
to exit. The setting will be automatically saved.
