Ltech V3, Operating Instruction

Page: 2 / 2

RGB
The Changing Mode
Operating Instruction for Remote:
Wiring Diagram :
Operating Instruction for Receiver:
Current selection switch
LED lamp
connection
LED lamp
connection
The running light
The running light
ID learning button
ID learning button
12~48Vdc
CV power supply
5~24Vdc
CV power supply
Operation table
Match/Clear code between remotes
Match/Clear code between remote and receiver
Match code :
Match code
:
Clear code
:
Clear code :
Receiver
Long press “ID learning button” on receiver for
5 seconds, If the running light flicker several
times, deactivate the matching successfully.
1. 2. 3.
Assuming that B
match up with A. Then press any key
on A in 5 seconds.
When the indicator
light of B turns off,
match successfully. Press the bottom
two keys of B
simultaneously until
the indicator light
keeps on .
Press the bottom two keys of B simultaneously
(about 6 seconds), the indicator light keeps
on, deactivated matching successfully.
Press
any key on the
remote, the running
light on the receiver flicker several times,
match successfully.
Short press the ID learning button on the
receiver, the running light keeps on.
1
.
2
.
Receiver
ID learning
button
ID learning
button
2
Short press: play.
Long press: save.
On/Off
Speed
Brightness
+
/
-
+
/
-
Scene Keys
Mode Key
Indicator Light
R -
R +
G - G +
B -
B +
1 2
Red
+
/
-
Green
+
/
-
Blue
+
/
-
1. Static Red
2. Static Green
3. Static Blue
4. Static Yellow
5. Static Purple
6. Static Cyan
7. Static White
8. RGB Skipping
9. 7 Colors Skipping
10. RGB Smooth
11. 7 Colors Smooth
CV Power Supply
5
~
24Vdc
CV Power Supply
5
~
24Vdc
CV Power Supply
5
~
24Vdc
www.ltech-led.com
Update time
:
2016
-
09
-
29
Attention:
Please replace the battery if the remote becomes insensitive or control distance is shortened.
Please take out the battery for long time unused.