Warranty exclusions below:
Warranty periods from the date of delivery 5 years.
Free repair or replacement services for quality problems are provided within warranty periods.
Beyond warranty periods.
Any artificial damage caused by high voltage, overload, or improper operations.
Products with severe physical damage.
Damage caused by natural disasters and force majeure.
Warranty labels and barcodes have been damaged.
No any contract signed by LTECH.
1.Repair or replacement provided is the only remedy for customers. LTECH is not liable for any incidental or consequential damage unless it is within the law.
2.LTECH has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.
This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.
Products shall be installed by qualified professionals.
LTECH products are non-waterproof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure it is mountedin a water proof enclosure.
Good heat dissipation will extend the working life of products. Please ensure good ventilation.
Please check if the working voltage used complies with the parameter requirements of products.
The diameter of wire used must be able to load the light fixtures you connect and ensure the firm wiring.
Before you power on products, please make sure all the wiring is correct in case of incorrect connection that causes damage to light fixtures.
If a fault occurs, please do not attempt to fix products by yourself. If you have any question, please contact your suppliers.
Warranty Agreement
Attentions
Update Log
Version
Update Content
Updated Time
A1
2020.06.01
Updated by
Liu
Weili
A2
2021.04.30
Liu
Weili
Remove the constant current stroboscopic test table (when the brightness exceeds 30%,...)
Change the TUV certification icon, add precautions and warranty agreement
SE-20-250-1000-W2D2
DALI
Push DIM/CCT
— 04 —
A3
2021.12.10
Liu
Weili
Change the product silk screen, delete TUV/RCM and other certification icons