2. Pairing instructions and f
unction settings
Access “Add Device “ list and follow the prompts to add the driver firstly. Pick “Remote-
Wireless Switch” from the list. Follow the prompts to pull out the insulation sheet first,
and then short press the built - in pairing button to put the device into activated mode.
The indicator light is flashing slowly at this moment, then click “Bluetooth Search” and
follow the prompts to add the device. After pairing up, go to the control interface and
select the buttons you are going to edit. The buttons allow you to bind lights, light groups
and panels. Also, you are able to short press /long press them to set up the lighting effects.
6
