3
4. Wiring Diagram:
*
An amplifier is needed when more than 32 decoders are connected, signal amplification
should not be more than 5 times continuously.
*
If the recoil effect occurs because of longer signal line or bad line quality, please try to
connect 0.25W 90-120Ω terminal resistor at the end of each line.
4
6. Warranty Agreement:
6.1 We provide lifelong technical assistance with this product:
★
This manual only applies to this model. W reserve the right to make changes without prior notice.
e
6.4 Any amendment or adjustment to this warranty must be approved in writing by our company
only.
6.3 Repair or replacement as provided under this warranty is the exclusive remedy to the
customer. We shall not be liable for any incidental or consequential damages for breach
of any stipulation in this warranty.
6.2 Warranty exclusions below:
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
A 5-year warranty is given from the date of purchase. The warranty is for free repair or
replacement if cover manufacturing faults only.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
Any man-made damages caused from improper operation, or connecting to excess voltage
and overloading.
Update Time:2017.06.02_A0
5. Attention:
5.1 The product shall be installed and serviced by the qualified person.
5.7 If a fault occurs please return the product to your supplier. Do not attempt to fix this product
by yourself.
5.6 Ensure all wire connections and polarities are correct before applying power to avoid any
damages to the LED lights.
5.5 Please ensure that adequate sized cable is used from the controller to the LED lights to
carry the current. Please also ensure that the cable is secured tightly in the connector.
5.4 Please check if the output voltage of the LED power supplies used comply with the working
voltage of the product.
5.3 Good heat dissipation will prolong the working life of the controller. Please ensure good
ventilation.
5.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors
please ensure it is mounted in a water proof enclosure.
LT-851-6A DMX/RDM Decoder
LT-851-6A DMX/RDM Decoder
