LT-424-UC
DALI
Push
Switch
COM
IN4
IN3
IN2
IN1
DA
DA
Switch Type
2
DALI Bus Power Supply
DALI
-
PS
-
MINI
L N
100
-
240V
AC
DALI
BUS
DALI Bus
Digital touch switch
Connections
Update Time: 2015.06.15
Reset switch
Reset Switch
Doorbell switch
1. Disconnect the power supply of all devices on the DALI bus before installing.
Installation:
Note: This product is only suitable for the reset switch. It can be Key 1, Key 2, Key 3 or Key 4.
If the switch failure occurs after pressing,
1. If the connection is correct;
2. Make sure to use the reset switch;
3. Check if the DALI power output is stable.
please check:
Troubleshooting:
3. Open the shell, set up the address.
2. Connect according to the above wiring diagram. DALI bus does not distinguish plus-minus polarity. Meanwhile connected
to the reset switch.
Address
Short Press: Press and release in 1 second to turn on/off.
Long Press: Press for more than 1
for dimming, first long press is increase brightness,
release and long press again is decrease brightness.
second
DALI Dimming Driver
DALI Dimming Driver
DALI Dimming Driver
DALI Dimming Driver
