Audio power amplifier
DMX-BT-AUDIO
LTSA512
MS Panel
Step 1: Insert a TF card or USB with copied tracks into the music controller.
(Refer to P7 → FAQs → How to change track sequences)
DMX-BT-AUDIO
Audio
cable
Bluetooth Connection
Step 2: Connect MS Panel to the music controller.
(Connection & setting method: Refer to P6 → Add a music controller)
Step 3: Short press the settings button of music controller and the communication light (blue light)
will flash fast , then the controller will be in search of the Bluetooth speaker.
(Complete step 3 within 2 minutes, otherwise continue repeating step 2)
有线连接
—
03
—
Speaker
Dry contact module
LTSA512 DMX lamp
Connection Diagram
5-24Vdc
Input voltage
DMX
signal
DMX
signal
12-24Vdc
Input voltage
Dry contact module
Bluetooth speaker (host)
DMX lamp
Speaker (slave)
Speaker (slave)
Speaker (slave)
Step 4: Refer to the Bluetooth speaker manual. Turn on Bluetooth and put the Bluetooth speaker in paring
mode; When the voice prompts ”Connect successfully” are delivered and the communication light
is on, connect successfully. Then tracks can be played through MS Panel App.
★
Remove paired Bluetooth speaker from the controller (reset to factory defaults): Long press the settings
button for 10 seconds until the communication light flashes fast, then remove successfully and reset to
factory defaults simultaneously.
MS Panel
5-24Vdc
Input voltage
DMX
signal
DMX
signal
5-24Vdc
Input voltage
Speaker
Speaker
Wired connection
