www.ltech-led.com
5
Connect ArtNet control system to computer
4.4 Add the IP address 2.X.X.X or
10.X.X.X (X could be arbitrary
value).
4.5 Interface of adding successful,
click “OK” and exit.
4.1 Open the Network, click
“Properties” button of the
TCP/IPv4 protocol.
4.2 Click “Advanced”.
4.3 Click “Add”.
2. Use the equipped adapter to power ArtNet control system
3. Connect ArtNet control system to computer via the cable.
1. Install the Madrix 3 software in the computer, the icon on the desktop :
MADRIX 3
4. IP Setting: This control system is compatible with random network segment. According to
the ArtNet protocol, 2.X.X.X or 10.X.X.X can be added in the computer ( X means
arbitrary value), methods as below:
This product is compatible with all the ArtNet software in the market, here take MADRIX as an
example:
